Ford Explorer: Engine - 2.3L EcoBoost (201kW/273PS) / Diagnosis and Testing - Engine
-
For basic mechanical concerns,
REFER to: Engine (303-00 Engine System - General Information, Diagnosis and Testing).
For driveability concerns, Refer to Powertrain Control/Emissions Diagnosis (PC/ED) manual.
Special Tool(s) /
General Equipment
100-002
(TOOL-4201-C)
Holding Fixture with Dial Indicator Gauge
303-1688Preload Tool, Balance Shaft
303-507Timing Peg, Crankshaft TDCTKIT-200..
Other information:
Removal
NOTE:
If installing a new PAM,
it is necessary to upload the module configuration information to the
scan tool prior to removing the module. This information must be
downloaded into the new PAM after installation.
Using a diagnostic scan tool, begin the PMI process for the PAM following the onscreen instructions...
Preliminary Inspection
Visually inspect the CV joints, housing, boots, and clamps for obvious signs of mechanical damage.
If an obvious cause for an observed or reported concern is
found, correct the cause (if possible) before proceeding to the next
step
If the cause is not visually evident, verify the symptom and REFER to Symptom Chart: NVH...
Categories
Use the key blade to start your vehicle and unlock or lock the driver door from
outside your vehicle. The integrated keyhead transmitter functions as a programmed
ignition key that operates all the locks and starts your vehicle, as well as a remote
control.

read more