Ford Explorer: Exhaust System - 2.3L EcoBoost (201kW/273PS) / Description and Operation - Exhaust System - Component Location
| Item |
Description |
| 1 |
Catalytic converter
|
| 2 |
Exhaust gas oxygen sensor - downstream
|
| 3 |
Catalytic converter heat shield
|
| 4 |
Gasket
|
| 5 |
Exhaust gas oxygen sensor - upstream
|
| 6 |
Catalyst converter
|
| 7 |
Exhaust flexible Pipe
|
| 8 |
Exhaust clamp
|
| 9 |
Resonator
|
| 10 |
Isolators
|
| 11 |
RH muffler
|
| 12 |
Tailpipe heat shield
|
| 13 |
LH muffler
|
| 14 |
Exhaust hanger bracket
|
| 15 |
Heat shield
|
| 16 |
Catalytic converter Mounting bracket
|
Overview
NOTICE:
Do not use leaded fuel in a vehicle equipped with a
catalytic converter. In a vehicle that is continually misfueled, the
lead in the fuel will be deposited in the catalytic conv..
Other information:
Removal
NOTE:
LH (left-hand) side shown, RH (right-hand) side similar.
NOTE:
Removal steps in this procedure may contain installation details.
Vehicles with passive entry
Remove the front door window regulator and motor.
Refer to: Front Door Window Regulator and Motor (501-11 Glass, Frames and Mechanisms, Removal and Installation)...
WARNING: Do not remove the coolant reservoir cap when the engine is on
or the cooling system is hot. Wait 10 minutes for the cooling system to cool down.
Cover the coolant reservoir cap with a thick cloth to prevent the possibility of
scalding and slowly remove the cap...
Categories
Push the lever up or down to operate
the windshield wipers.

A - Single wipe.
read more