Ford Explorer: Body Closures / Description and Operation - Body Closures - Overview
Overview
The power liftgate feature allows power opening and closing of the liftgate using any of the following methods:
-
The front power liftgate switch (located on the instrument panel).
-
The rear interior power liftgate switch (located on the bottom of the liftgate trim panel) (close only).
-
The liftgate release switch (located in upper portion of the liftgate handle cavity).
-
The power liftgate hands-free feature (if equipped).
-
The liftgate button on a RKE transmitter.
System Operation
System Diagram
Item
Description
1
RGTM
2
Front Power Liftgate Switch
3
Exterior Liftgate Release Switch
4
Anti-Pinch Switches
5
BCM
..
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the steering column shrouds.
Refer to: Steering Column Shrouds (501-05 Interior Trim and Ornamentation, Removal and Installation).
NOTE:
Make sure the component terminals are not bent or damaged...
Activation
Phase 1 - Leak Verification
Run the EVAP Test with the scan tool.
NOTE:
Some small leaks may not be detected using the EVAP Test. If the system has passed the test but a leak is still suspected, then proceed to Phase 2...
Categories
Note: You may not be able to shift out of park (P) unless the intelligent
access key is inside your vehicle.

read more