Ford Explorer: Side and Rear Vision / Description and Operation - Blind Spot Information System - Component Location
Component Location - Blind Spot Monitoring System
| Item |
Description |
| 1 |
PDM
|
| 2 |
RH exterior mirror |
| 3 |
SODR
|
| 4 |
SODL
|
| 5 |
DDM
|
| 6 |
LH exterior mirro r |
BLIS®
The BLIS®
aids the driver in assessing whether another vehicle is present within a
specific area (blind spot) to either side of the vehicle, extending
rearward approximately 6 m (20 ft) ..
Other information:
WARNING: Do not place objects or mount equipment on or near the headliner
at the siderail that may come into contact with a deploying curtain airbag. Failure
to follow these instructions may increase the risk of personal injury in the event
of a crash...
Activation
Update the AWD (all-wheel drive) module to the
latest calibration available. Module reprogramming will erase stored
transfer case clutch kiss point values and initiate rapid kiss point
learn procedure. If no later calibration is available then proceed with
process below:
1...
Categories
The front outboard and rear safety restraints in the vehicle are combination
lap and shoulder belts.

read more