Ford Explorer: Adaptive Cruise Control / About Adaptive Cruise Control With Stop, Go and Lane Centering. About Intelligent Adaptive Cruise Control

Ford Explorer 2020-2022 Owners Manual / Adaptive Cruise Control / About Adaptive Cruise Control With Stop, Go and Lane Centering. About Intelligent Adaptive Cruise Control

Adaptive cruise control with stop and go uses radar and camera sensors to adjust the speed of your vehicle to maintain a set gap from the vehicle in front of you in the same lane while following it to a complete stop. You can also engage the system to follow a vehicle in front of you and adjust set speed while stopped.

Adaptive cruise control with lane centering uses radar and camera sensors to help keep your vehicle in the lane by applying continuous assistance steering torque input toward the lane center on highways.

Note: The adaptive cruise control gap setting operates normally.

Intelligent adaptive cruise control combines speed sign recognition with adaptive cruise control to adjust the cruise set speed to the speed limit detected by the speed sign recognition system. For example, if the speed sign recognition system detects a 50 mph (80 km/h) speed limit, the cruise set speed is updated to 50 mph (80 km/h).

Note: The adaptive cruise control gap setting operates normally.

    Adaptive Cruise Control

    ..

    Adaptive Cruise Control Precautions - Vehicles With: Adaptive Cruise Control With Lane Centering

    Adaptive cruise control precautions apply to lane centering unless stated otherwise or contradicted by a lane centering precaution. See Adaptive Cruise Control Precautions...

    Other information:

    Ford Explorer 2020-2022 Service Manual: Removal and Installation - Liftgate


    Removal NOTE: Removal steps in this procedure may contain installation details. Remove the liftgate trim panel. Refer to: Liftgate Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation). Remove the D-Pillar trim panel...

    Ford Explorer 2020-2022 Service Manual: Removal and Installation - Sunload Sensor


    Special Tool(s) / General Equipment Interior Trim Remover Removal Remove the sunload sensor from the instrument panel. Disconnect the electrical connector. Use the General Equipment: Interior Trim Remover Installation To install, reverse the removal procedure...

    Categories

    Intelligent Access Key

    Note: You may not be able to shift out of park (P) unless the intelligent access key is inside your vehicle.

    read more

     
    Copyright © 2022 www.foexplorer.com