Ford Explorer: Engine Ignition - 2.3L EcoBoost (201kW/273PS) / Specifications

Ford Explorer 2020-2025 Service Manual / Powertrain / Engine / Engine Ignition - 2.3L EcoBoost (201kW/273PS) / Specifications


  General Specifications


Item Specification
Spark plug 12405
Spark plug gap   0.0295  in ( .75  mm)

    Engine Ignition - 2.3L EcoBoost (201kW/273PS)

    ..

    Description and Operation - Engine Ignition - Component Location

    2..

    Other information:

    Ford Explorer 2020-2025 Service Manual: General Procedures - Welding Precautions


    Check   WARNING: Invisible ultraviolet and infrared rays emitted in welding can injure unprotected eyes and skin. Always use protection such as a welder's helmet with dark-colored filter lenses of the correct density. Electric welding will produce intense radiation, therefore, filter plate lenses of the deepest shade providing adequate visibility are recommended...

    Ford Explorer 2020-2025 Service Manual: Removal and Installation - Crankcase Vent Oil Separator


    Removal NOTE: Removal steps in this procedure may contain installation details. Remove the intake manifold. Refer to: Intake Manifold (303-01A) . Disconnect the quick release coupling and remove the hose. Refer to: Quick Release Coupling (310-00A Fuel System - General Information - 2...

    Categories

    Intelligent Access Key

    Note: You may not be able to shift out of park (P) unless the intelligent access key is inside your vehicle.

    read more

     
    Copyright © 2025 www.foexplorer.com