Ford Explorer: Maintenance / Oil Change Indicator Reset

Ford Explorer 2020-2026 Owners Manual / Maintenance / Oil Change Indicator Reset

Use the information display controls on the steering wheel to reset the oil change indicator.

From the main menu scroll to:

    Engine Oil Check

    To check the engine oil level consistently and accurately, do the following: Make sure the parking brake is on. Make sure the transmission is in park (P) or neutral (N)...

    Engine Coolant Check

    WARNING: Do not remove the coolant reservoir cap when the engine is on or the cooling system is hot. Wait 10 minutes for the cooling system to cool down...

    Other information:

    Ford Explorer 2020-2026 Service Manual: Removal and Installation - Passenger Door Window Control Switch


    Special Tool(s) / General Equipment Interior Trim Remover Removal Remove the passenger door window control switch bezel assembly. Release the locking tabs from the passenger door window control switch bezel assembly. Use the General Equipment: Interior Trim Remover Disconnect the electrical connector and remove the passenger door window control switch bezel..

    Ford Explorer 2020-2026 Service Manual: Removal and Installation - Axle Housing Bushing


    Special Tool(s) / General Equipment 205-1066Installer, Bushing Flat Headed Screw Driver Removal NOTE: Only worn or damaged bushings need to be replaced. Remove the rear axle assembly. Refer to: Axle Assembly (205-02 Rear Drive Axle/Differential, Removal and Installation)...

    Categories

    Integrated Keyhead Transmitter (If Equipped)

    Use the key blade to start your vehicle and unlock or lock the driver door from outside your vehicle. The integrated keyhead transmitter functions as a programmed ignition key that operates all the locks and starts your vehicle, as well as a remote control.

    read more

     
    Copyright © 2026 www.foexplorer.com