Ford Explorer: Instrument Cluster / Audible Warnings and Indicators
Key in Ignition Warning Chime
Sounds when you open the driver's door and you have left the key in the ignition.
Keyless Warning Alert (If Equipped)
Sounds the horn twice when you exit your vehicle with the intelligent access
key, after the last door is closed and your keyless vehicle is in RUN, indicating
your vehicle is still on.
Headlamps On Warning Chime
Sounds when you remove the key from the ignition and open the driver's door and
you have left the headlamps or parking lamps on.
Parking Brake On Warning Chime
Sounds when you have left the parking brake on and drive your vehicle. If the
warning chime remains on after you have released the parking brake, have the system
checked by an authorized dealer immediately.
The following warning lamps and indicators alert you to a vehicle condition that
may become serious. Some lamps illuminate when you start your vehicle to make sure
they work...
Other information:
Deactivation
NOTE:
During vehicle build, some modules, such as the IPC and BCM module are set in factory mode.
Factory mode reduces the drain on the battery during longer periods
where the vehicle is not used. While in the factory mode, various
systems may be altered or disabled and the IPC
displays FACTORY MODE CONTACT DEALER in the message center...
Overview
Headlamps
The LED
headlamp system is a quad-beam pattern system. It consists of
non-replaceable low and high beam Light Emitting Diodes (LEDs) in each
headlamp assembly.
When the LH
steering column multifunction switch is pulled briefly, the high beam
Light Emitting Diodes (LEDs) briefly illuminate for the flash-to-pass
function...