Ford Explorer: Adaptive Cruise Control / Adaptive Cruise Control Indicators - Vehicles With: Adaptive Cruise Control
With Stop and Go
Illuminates when you switch the
system on. The color of the indicator changes to indicate the system status.
White indicates the system is on but inactive.
Green indicates the system is active and the speed has been set.
Illuminates when you switch lane
centering on. The color of the indicator changes to indicate the system status.
Gray indicates the system is on but inactive...
A bracket appears around the set speed and the detected speed limit sign in the
information display.
System Warnings
If the set speed is increased beyond the speed limit or speed limit plus a po..
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the wheel bearing and wheel hub.
Refer to: Wheel Bearing and Wheel Hub (204-02 Rear Suspension, Removal and Installation).
Remove the 3 bolts and the brake disc shield...
Programming
NOTE:
If a new APIM is being installed, install the new APIM before carrying out the following procedure.
If replacing the APIM do not connect the new APIM to a Wi-Fi network before completing scan tool APIM replacement programming as it may cause programming concerns...
Categories
You can use the power door lock control or the remote control to lock and unlock
your vehicle.
Power Door Locks
The power door lock control is on the driver and front passenger door panels.

read more