Ford Explorer: Intake Air Distribution and Filtering - 2.3L EcoBoost (201kW/273PS) / Description and Operation - Intake Air Distribution and Filtering - Overview
Overview
The
air intake system cleans intake air with a replaceable, dry-type engine
Air Cleaner (ACL) element made of treated, pleated paper. A new Air
Cleaner (ACL) element must be installed periodically as scheduled.
Engine performance and fuel economy are adversely affected when maximum
restriction of the Air Cleaner (ACL) element is reached.
The CAC subsystem cools and increases the density of the compressed, turbocharged air.
The air intake system measures air temperature with the IAT sensor.
Other information:
Removal
NOTE:
LH (left-hand) side shown, RH (right-hand) side similar.
NOTE:
Removal steps in this procedure may contain installation details.
Vehicles with passive entry
Remove the rear door window regulator and motor.
Refer to: Rear Door Window Regulator and Motor (501-11 Glass, Frames and Mechanisms, Removal and Installation)...
Special Tool(s) /
General Equipment
204-592Separator, Lower Arm Ball JointTKIT-2006C-FFMFLMTKIT-2006C-LMTKIT-2006C-ROW
Vehicle/Axle Stands
Removal
NOTICE:
Suspension fasteners are critical parts that affect the
performance of vital components and systems...
Categories
WARNING: Position the seatbelt height adjuster so that the seatbelt rests
across the middle of your shoulder. Failure to adjust the seatbelt correctly could
reduce its effectiveness and increase the risk of injury in a crash.
read more